Briquetting Machines for Non-Ferrous Metals
The firms, which work metals like copper and aluminum or derived from alloys like bronze and cast iron, are often confronted the problem about slags, their recuperating, their transport and their disposal.
The briquetting machines for non-ferrous metals, which are produced by Trezzi cilindri s.r.l., allow to solve all these difficulty with one solution.
These machineries allow to obtain small briquettes of material through the recuperating of the slags which are obtained by the metal-working. There’s the possibility to reduce the volume that is taken by the waste, all this allow to facilitate the storage of the slags and their transport. At the same time these briquettes reduce the environmental impact and acquire an economic value very important.
Here our briquetting machines for non-ferrous matals:
Model | ALS 40 | ALS 70 | ALS 80 | ALS 90 |
Photo | – | – | – | – |
Diam. Briquette | 40mm | 70mm | 80mm | 90mm |
Production KG/h | 50/60 | |||
n°cylinders | 3 | 3 | 3 | 3 |
Engine KW | 7,5 | 22 | 22 | 22 |
Force Developed KG/cm2 | 1700 | 3800 | 2900 | 2300 |
Max Press.Exercise (bar) | 200 | 300 | 300 | 300 |
System Vortex | ||||
Level Switch | v | v | v | v |
Thermost | v | v | v | v |
Inspection Door | v | v | v | v |
Air-Oil Heat Exchanger | optional | v | v | v |
Cooler | / | / | / | / |
Hydraulic Preheating | / | / | / | / |
Voltage Volt/Hz | 400/50 | 400/50 | 400/50 | 400/50 |